There are a lot of people who should consider making their personalized stone mosaics. With the said item, they can put it as a decorative item for their houses. They can put it in their garden or at their porch. For those who want to personalize their own stones, then here are several tips they should consider following.
First, it is only proper for the person to buy premixed concrete. A single bag should be enough for this kind of project. Having a bag of the premixed concrete should allow the person to easily make the mosaic. Buy the said bag through the nearest gardening or hardware store in the area.
It is also a must for the person to buy some glass tiles. There are times when the person has to cut their own glass just to make it useful for the pattern that one is thinking of. It should be easy for the person to make this. The person can cut a form for it, with the desired size, through a bucket or a plastic dishpan.
After the person has cut out the form, it is for the best to cure it so that it can be used for the project. The person should make sure to apply some lubricant oil or non-stick sprays on the said form. With the said oil on the form, it will be easy to remove the hardened concrete from the form later on.
There should be a pattern that the person will follow. For this pattern, the person will have to draw or make a copy of it on a transparent sheet of paper. If possible, the person should avoid using a pattern that has curves in it. This is because the final image that the person can make out of this pattern will just become distorted.
After the pattern has been made, it is then necessary for the person to use the premixed concrete. This time, the person has to mix this up properly. One needs to follow what the instruction on the packaging says. Also, make sure to fill up an entire container with a depth of two inches with the wet concrete.
It is a given for the person to mix the concrete properly. If the wet concrete is already prepared, then it is time for the person to pour in onto the prepared mold. There may be trapped bubbles on the wet concrete so make sure to eliminate them. To remove the trapped bubbles, just swirl the mold gently.
The bubbles should be eliminated by doing this. After that, what the person needs to do is to even out the poured wet concrete. To easily even out the poured wet concrete, the person should use the paint stick. For more practical people, they will not buy a paint stick anymore but just make use of scrap wood.
The mold will then have to be set inside. Keep it away from the glare of direct sunlight for at least two to three days. By simply doing this, there will be no cracks on the final product when the concrete is removed from its mold. To remove the mold, turn it over a thick towel and tap the base to make these stone mosaics come out.
You can visit the website www.artsaics.com for more helpful information about Tips In Forming Amazing Stone Mosaics Easily
